BlueCut Schnittschutzhandschuh beim Schneiden

CE Marking on Protective Gloves: What the PPE Regulation Requires

Anyone buying protective gloves will find a CE mark on the glove or its packaging. This article explains what the CE marking on protective gloves means, which categories Regulation (EU) 2016/425 divides personal protective equipment into, who tests the glove and which documents belong with it.

What does the CE marking on protective gloves mean?

With the CE mark, the manufacturer declares that the personal protective equipment complies with Regulation (EU) 2016/425. For this it issues an EU declaration of conformity and takes responsibility for compliance with the regulation. The mark must be clearly visible, legible and durable on the equipment and affixed before it is placed on the market. If that is not possible for a product, it goes on the packaging and the accompanying documents. The CE marking is therefore a declaration by the manufacturer. Whether it also includes testing by a third party depends on the category.

Which PPE categories are there?

The regulation divides personal protective equipment by the risk it is meant to protect against:

  • Category I applies exclusively to minimal risks, such as superficial mechanical injuries, mild cleaning agents, prolonged contact with water or hot surfaces up to 50 °C.
  • Category II is the catch-all category for all risks that fall neither under Category I nor under Category III.
  • Category III covers risks with very serious consequences such as death or irreversible damage to health. These include cuts from hand-held chainsaws, injuries from projectiles or knife stabs, heat of 100 °C or more, cold of −50 °C or less and electric shock.

Who tests the glove, and from which category is testing required?

The higher the category, the more testing is added:

  • Category I: The manufacturer tests itself. The regulation calls this internal production control (Module A).
  • Category II: A notified body carries out the EU type-examination (Module B). The manufacturer then ensures in production that every glove matches the examined type (Module C). This applies to puncture-resistant gloves made of ring mesh to EN 1082-1 and to cut-resistant gloves to EN 388.
  • Category III: In addition to the type-examination, a notified body also monitors production, either through product checks at random intervals (Module C2) or through quality assurance of the production process (Module D). In Category III, the four-digit identification number of this body appears after the CE mark. This applies, for example, to puncture-resistant aprons made of ring mesh to EN ISO 13998.

An EU type-examination certificate is valid for five years at most. As an example, the declaration of conformity for the niroflex BlueCut comfort names the EU type-examination certificate of 15.07.2024 and the notified body with identification number 2369. It states Regulation (EU) 2016/425 and the standards EN ISO 21420:2020 and EN 388:2016 + A1:2018 as its basis.

Which documents belong with a protective glove?

Every glove comes with two documents. The EU declaration of conformity is supplied with the product or can be retrieved via an internet address given in the instructions for use. The manufacturer’s instructions for use must contain, among other things:

  • notes on storage, use, cleaning, maintenance, inspection and disinfection
  • the test results for the protection levels and the limits of use
  • the risk the glove is meant to protect against and the meaning of the markings
  • the standards applied and, if a notified body was involved, its name and identification number

At niroflex, the declaration of conformity and the datasheet are available for download on the respective product page, for example for the BlueCut advance cc. What the digits and letters in the datasheet mean is explained in What Does EN 388 Mean for Gloves? The Whole Pictogram Explained.

What should companies look for when purchasing?

The protective equipment has to match the risk at the workplace as determined by the risk assessment. When buying, it is worth checking four things: the CE mark on the glove, the pictogram with the test values, the declaration of conformity and the instructions for use.

Frequently asked questions about the CE marking on protective gloves

Is the CE marking alone enough as proof?

The CE mark is a declaration by the manufacturer. For Category II and III, a notified body has also tested the type. The EU type-examination certificate and the declaration of conformity provide the proof.

How do I recognise Category III?

For Category III, the regulation requires the four-digit identification number of the notified body directly after the CE mark. More reliable than looking at the mark is the category stated in the declaration of conformity and in the type-examination certificate.

How long is an EU type-examination certificate valid?

Five years at most. After that, the manufacturer has to have it renewed.


Would you like to choose the right niroflex protective gloves for your work processes? Contact us directly or download our product catalogue.